Injector Adapter V‑2.5 – Handcrafted Wood Adapter (14mm & 18mm)

Injector Adapter V‑2.5 – Handcrafted Wood Adapter (14mm & 18mm) — the complete buyer’s guide

This is the missing link between the hardware you already own and the connection you want to use. Injector Adapter V‑2.5 – Handcrafted Wood Adapter (14mm & 18mm) is a purpose-made Ed’s TnT adapter—not a generic "one size fits all" part—with its own stated device interface and fitting options.

The tangible details Ed actually specifies

• From the finest figured Cocobolo in 14mm or 18mm male for use with your favorite water tool.
• Has a 1/2" counter sink at the bottom of the load area where the screen sits flat providing a more thorough extraction.
• Version-2.5 Has a 5/8" ID upper with a depth of 5/8" bringing it closer to the heat source.
• Compatible with devices from a variety of makers including Herborizer, Elev8r.

What is this, exactly?

An adapter is the link between two already-owned parts—often a vaporizer heater or stem and a water-pipe or bowl connection. The adapter itself is not the heater or a complete water pipe.

What does it fit?

Device family: Ball Vape / Injector Systems. A ball vape is a heated-air extraction setup with a separate heater/head, bowl or adapter, and usually compatible glass. The heater, bowl and connection are distinct parts that are not automatically included.

How will it help your setup?

Check both ends: the named device interface and the selected 14 mm, 18 mm, 19 mm or specialty joint. Those numbers indicate fitting dimensions, not the quantity of items included.

Sizes, finishes and versions — choose confidently

Choose from these exact options listed by Ed. All choices live under this one product, not separate duplicate listings:

• Size: 14mm
• Size: 18mm

Size choice: millimeter measurements identify the stated joint or adapter size. Measure the mating connection instead of choosing solely by the device photograph.

What arrives in the package?

This listing is for the named Ed’s TnT accessory and the option you select. Devices, heaters, glass pieces, tips, caps or cooling inserts pictured to demonstrate compatibility are not automatically included; rely on Ed’s explicit component list below.

Setup and care, without the guesswork

Inspect the part before installation, work only when the device is fully powered off and cool, and follow your device maker’s assembly instructions. Wood care matters: Ed warns against soaking, washing, submerging or dipping handcrafted wood stems and adapters in liquids. Carefully clean the internal path using the method he gives for your model; wipe the outside rather than immersing it.

New to the terminology?

WPA / water-pipe adapter

A connector that lets a compatible vaporizer or stem interface with the matching fitting on a water piece. It is not the water pipe itself.

mm / joint size

Millimeters describe a physical fit; 14 mm, 18 mm, 19 mm and 22 mm are not all interchangeable. Male and female ends must be compatible.

Injector heater

A heated head designed to direct hot air into a matching bowl/adapter opening. The injector opening must match the accessory.

Why shop the Ed’s TnT line?

Ed’s work is associated with hand-turned, Mississippi-made hardwood accessories. These pieces are selected for a reason: a real fitment need, a specific replacement task or a way to personalize compatible equipment. Grain, figuring and natural marks are part of the handmade character, not an indication that every piece will look exactly like a product photo. For gifts, the most thoughtful choice is one that matches the recipient’s exact device and connection.

From Ed’s workshop — original product information

Need an Injector Adapter made to last? Here ya go! From the finest figured Cocobolo in 14mm or 18mm male for use with your favorite water tool. Version-2.5 Has a 5/8" ID upper with a depth of 5/8" bringing it closer to the heat source. Deeper recessed upper top rim for the Injector head to sit down within snugger. Has a 1/2" counter sink at the bottom of the load area where the screen sits flat providing a more thorough extraction.

Compatible with devices from a variety of makers including Herborizer, Elev8r. CH710, Cloud Connoisseur, Qaroma, Old Head Trading Company and more. Cleaning: First off you should never soak or submerge any of the wood stems I make. Simply take a cotton swab dipping it in high proof alcohol, squeeze out the excess then swab out the inner portion of the stem to remove any buildup doing this as needed.

Let dry, you’re good to go. Be advised, as with all my work its natural as Mother Nature intended. There may be voids, worm holes, live edges and raw features. Each piece is unique and no two are the same. The piece you receive most likely will not be the same as what is pictured but will be a beautifully unique handcrafted piece.

Manufacturer: Ed’s TnT. Product and variant information referenced from Ed’s official catalog on 20 October 2026. Inspect manufacturer instructions and confirm supplier stock before offering for sale.