Ed’s Wood Matrix Sleeve/Bowl – Compatible with Cannabis Hardware

Ed’s Wood Matrix Sleeve/Bowl – Compatible with Cannabis Hardware — the complete buyer’s guide

Precision matters where a heater meets the bowl. Ed’s Wood Matrix Sleeve/Bowl – Compatible with Cannabis Hardware is made for the stated insert or chamber arrangement, helping owners who know their heater model choose the correct physical interface.

The tangible details Ed actually specifies

• It easily accepts the glass or metal 22mm inserts in the top as well as their glass joint underneath with a high temp oring seated around both within a small recess.
• Did something a little different here, normally don't do pieces that work with glass but after a couple pokes, prods and maybe a foot in the butt I gave it a go.
• These will come with a SS Screen, 2 fitted orings (1 for the insert / 1 for the joint).
• These will not come with any glass!

What is this, exactly?

This is the part of a modular vaporizer system where material is loaded or where a separate insert rests. A chamber or sleeve is not the heater itself.

What does it fit?

Device family: Cannabis Hardware / Matrix. Cannabis Hardware and Crossing Technology make modular heater, bowl and adapter systems. Hardware may look similar, but heater-head dimensions, insert and glass joint must all match.

How will it help your setup?

Check the heater-head geometry, insert design and screen placement. Parts advertised for one Matrix configuration may not fit another without the correct adapter.

Sizes, finishes and versions — choose confidently

One configuration is shown for this listing. The product photos illustrate the model; where genuine wood is present, natural grain and figuring may differ from the example.

What arrives in the package?

This listing is for the named Ed’s TnT accessory and the option you select. Devices, heaters, glass pieces, tips, caps or cooling inserts pictured to demonstrate compatibility are not automatically included; rely on Ed’s explicit component list below.

Setup and care, without the guesswork

Inspect the part before installation, work only when the device is fully powered off and cool, and follow your device maker’s assembly instructions. Wood care matters: Ed warns against soaking, washing, submerging or dipping handcrafted wood stems and adapters in liquids. Carefully clean the internal path using the method he gives for your model; wipe the outside rather than immersing it.

New to the terminology?

Bowl / insert

The part that holds material while the compatible heater supplies hot air. Some systems use replaceable inserts or screens.

Why shop the Ed’s TnT line?

Ed’s work is associated with hand-turned, Mississippi-made hardwood accessories. These pieces are selected for a reason: a real fitment need, a specific replacement task or a way to personalize compatible equipment. Grain, figuring and natural marks are part of the handmade character, not an indication that every piece will look exactly like a product photo. For gifts, the most thoughtful choice is one that matches the recipient’s exact device and connection.

From Ed’s workshop — original product information

Did something a little different here, normally don't do pieces that work with glass but after a couple pokes, prods and maybe a foot in the butt I gave it a go. Learned something from designing the CT Matrix was able to implement into these making them even better than before. This was designed and made to work as an alternative to the Cannabis Hardware Matrix Bowl Can. Did it in Tigerwood which most of you all are familiar with from other products offered for the FlowerPot and other items.

It easily accepts the glass or metal 22mm inserts in the top as well as their glass joint underneath with a high temp oring seated around both within a small recess. Since it wont get hot to the touch there is no need for a handle. These will come with a SS Screen, 2 fitted orings (1 for the insert / 1 for the joint). These will not come with any glass! Cleaning: First off you should never soak or submerge any of the wood stems or adapters I make.

Simply take a cotton swab dipping it in high proof alcohol, squeeze out the excess then swab out the inner portion of the stem to remove any buildup doing this as needed. Let dry, you’re good to go. Be advised, as with all my work its natural as Mother Nature intended. There may be voids, worm holes, live edges and raw features. Each piece is unique and no two are the same. The piece you receive most likely will not be exactly the same as what is pictured but will be a beautifully unique handcrafted unit.

Manufacturer: Ed’s TnT. Product and variant information referenced from Ed’s official catalog on 20 October 2026. Inspect manufacturer instructions and confirm supplier stock before offering for sale.