Crossing Technology Matrix Adapter

Crossing Technology Matrix Adapter — the complete buyer’s guide

This is the missing link between the hardware you already own and the connection you want to use. Crossing Technology Matrix Adapter is a purpose-made Ed’s TnT adapter—not a generic "one size fits all" part—with its own stated device interface and fitting options.

The tangible details Ed actually specifies

• At 1.5"H x 1.25" OD these are solid and robust.
• Has a large upper cavity half as deep upper side with a slightly smaller center bore.
• Made from South American Tigerwood, will vary in grain pattern.
• Head and handle not included in purchase, picture is for demonstration only As with all the pieces made here, they should never be washed, soaked, submerged or dipped in any liquid ever!

What is this, exactly?

An adapter is the link between two already-owned parts—often a vaporizer heater or stem and a water-pipe or bowl connection. The adapter itself is not the heater or a complete water pipe.

What does it fit?

Device family: Crossing Technology / Matrix. Cannabis Hardware and Crossing Technology make modular heater, bowl and adapter systems. Hardware may look similar, but heater-head dimensions, insert and glass joint must all match.

How will it help your setup?

Check both ends: the named device interface and the selected 14 mm, 18 mm, 19 mm or specialty joint. Those numbers indicate fitting dimensions, not the quantity of items included.

Sizes, finishes and versions — choose confidently

Choose from these exact options listed by Ed. All choices live under this one product, not separate duplicate listings:

• Size: 14mm
• Size: 19mm

Size choice: millimeter measurements identify the stated joint or adapter size. Measure the mating connection instead of choosing solely by the device photograph.

What arrives in the package?

Ed explicitly lists these components:

• Hand-turned Tigerwood adapter
• Preinstalled retaining O-ring

Additional photographed devices, supporting glass, or heat sources are not implied unless specified in the maker notes.

Setup and care, without the guesswork

Inspect the part before installation, work only when the device is fully powered off and cool, and follow your device maker’s assembly instructions. Keep screens and seals clear of residue and replace worn parts with the exact matching model.

New to the terminology?

WPA / water-pipe adapter

A connector that lets a compatible vaporizer or stem interface with the matching fitting on a water piece. It is not the water pipe itself.

Bowl / insert

The part that holds material while the compatible heater supplies hot air. Some systems use replaceable inserts or screens.

Why shop the Ed’s TnT line?

Ed’s work is associated with hand-turned, Mississippi-made hardwood accessories. These pieces are selected for a reason: a real fitment need, a specific replacement task or a way to personalize compatible equipment. Grain, figuring and natural marks are part of the handmade character, not an indication that every piece will look exactly like a product photo. For gifts, the most thoughtful choice is one that matches the recipient’s exact device and connection.

From Ed’s workshop — original product information

Our guy Scott at Vgoodiez asked me if there was anything I could do for the CT. Got a little excited to do em since trying the CH Matrix. In doing these I learned something new I was able to implement in making these and those even better. At 1.5"H x 1.25" OD these are solid and robust. Has a large upper cavity half as deep upper side with a slightly smaller center bore. Opposite end bored a little over with an inner groove oring installed to retain the glass joint within.

Made from South American Tigerwood, will vary in grain pattern. Its very dense having used it for a few other products its become a great candidate for this purpose. It takes the same replacement glass joints offered by CT. Has a hands free fit with Ruby twist and a looser but airtight seal with CT8. Head and handle not included in purchase, picture is for demonstration only As with all the pieces made here, they should never be washed, soaked, submerged or dipped in any liquid ever! Simply dip a cotton swab in high proof alcohol, squeeze the excess out, swab as needed to remove any build up or residue, let dry.

Be advised, as with all my work its natural as Mother Nature intended. There may be voids, worm holes, live edges and raw features. Each piece is unique and no two are the same. The piece you receive most likely will not be exactly the same as what is pictured but will be a beautifully unique handcrafted unit.

Manufacturer: Ed’s TnT. Product and variant information referenced from Ed’s official catalog on 20 October 2026. Inspect manufacturer instructions and confirm supplier stock before offering for sale.